ListerENGINEERING
STUDIO
TROpen studio ↗

Technical reference

DC Circuits & Electrical Power

Calculate a resistive DC circuit using consistent units.

The model

Voltage is the potential difference between two points; current is the rate of charge flow. A resistive element follows Ohm's law, V = IR. This model assumes a linear, constant resistance, which is not the behaviour of every electronic component.

In a DC circuit, P = VI. For a resistor, power can also be written as P = I²R. Series resistors carry the same current, while parallel branches have the same voltage. The way a measuring instrument is connected affects the result and the circuit.

I = V / R; P = V I

Worked example

With 12 V across 6 Ω, the current is 2 A and the power is 24 W.

Scope & assumptions

AC motors introduce power factor, phase count and efficiency. The DC examples here do not determine mains protection, cable cross-sections or contactor ratings. Work on energized electrical installations requires appropriate competence.

TRY IT YOURSELF

Check your understanding.

Change the resistance to 12 Ω and calculate the current and power again.

Open the companion calculator ↗

Sign-in required. Calculator interface currently in Turkish.

KEEP EXPLORINGBack to the reference library →