ListerENGINEERING
STUDIO
TROpen studio ↗

Technical reference

Parametric Modeling & STL Units

Connect dimension changes to geometry and interpret an STL export.

The model

In a parametric model, values such as length, width, height and hole diameter are inputs to the geometry. Changing a dimension regenerates the model, allowing alternatives to be compared without redrawing each one manually.

The Lister workspace includes box, cylinder and single-hole plate models. Orbit and zoom controls support inspection from different angles. A plate hole passes through its thickness, and its diameter must be smaller than the relevant plate dimensions.

V_cylinder = π r² h

Worked example

For r = 10 mm and h = 20 mm, the cylinder volume is approximately 6283.19 mm³.

Scope & assumptions

STL stores triangular surface geometry and does not carry a unit declaration. The studio treats coordinates as millimetres and states this in the filename. Select the same unit when importing the file into manufacturing software.

TRY IT YOURSELF

Check your understanding.

Change the length of a plate and observe how its volume and appearance change.

Open the companion calculator ↗

Sign-in required. Calculator interface currently in Turkish.

CONTINUE READINGAxial Stress & Cross-Section →